How-To Ask Questions [GUIDE] October 07 2014

Thanks for checking out Pools.com Community Site! Here you'll learn how to setup an account to start posting your questions!     First, You'll need an account! Just click on the link here or on the "View/Ask Questions" page click "Register".     Next you'll see a place to enter a Username and Email. Your password will be emailed to you. (It may end up in your spam folder!)   Once you've received the email you can login right on the "View/Ask Questions" page. From there you just click on the "Ask a question" button to get started! You'll be brought to a page where you can post your questions. You'll select a "Category" for your question and "Tags" that other users can use to search for your question. Next you'll need a title, something short and descriptive like, "Cloudy Water Problem in My Pool!". Then you'll go into details about the problem. When did the problem start? How big is your pool? What have you tried? What kind of pool do you have? Etc. You'll then be brought to your questions page where answers will be posted. Users can vote your answer up and down as well as your questions. You can post replies to the problem for clarification or answer the problem directly. If someone has answered your problem, please mark the answer as "Solved or Correct" by clicking the check mark! Remember you can always search and see if someones had your problem before you post a new question by using the search bar! Now you're ready to go! Remember you can always search our "Learning" section for How-To's and general pool/spa problem solving tips here!

Why Do I have Cloudy Water? October 06 2014

Why Do I have Cloudy Water? The Causes of Cloudy Water Cloudy water can be caused by several issues. Inadequate Filtration - Failure to run the filter long enough, insufficient or inconsistent backwashing, or a dirty/ worn filter are the most commons causes for cloudy water. pH Imbalance - If you're eliminated filtration as an issue, pH is the next likely cause. pH is the single most important aspect of pool maintenance. The correct pH for your water should be between 7.2 and 7.6. When pH rises above 7.6, calcium precipitates out of the water in the form of scale or suspended particles that can cloud the water.If your total alkalinity is low, the pH level will be very sensitive and may suffer drastic swings that can cloud your water. On the other hand, high alkalinity can keep your pH rigidly fixed at a level that contributes to cloudy water and scaling.Proper total alkalinity levels are listed below according to pool type:

Plaster	80 - 125 ppm
Gunite	80 - 125 ppm
Concrete	80 - 125 ppm
Vinyl	125 - 150 ppm
Fiberglass	125 - 150 ppm
Painted	125 - 150 ppm

  Chlorine Level Deficiencies - Failure to maintain adequate free available chlorine levels and shock regularly can also cause cloudy water. When chlorine levels are too low, algae and other microbes multiply freely, creating an organic haze. Always maintain a free available chlorine residual of 1.0-4.0 ppm and shock the pool according to label directions. Do not use the pool until the chlorine level is between 1.0 and 4.0 ppm.   Cloudy Water Treatment There are several solutions that will help you clear cloudy pool water. Aqua Chem Shock PLUS and Shock Xtra Blue are formulated to clear cloudy water fast. In addition, you will want to verify that you’re properly doing the following activities routinely.

• Check the filter for worn or broken parts and replace as necessary
• Check operating instructions and increasing filter running time to an 8-hour daily minimum
• Backwashing your filter until a clear stream of water flows
• Cleaning a dirty filter with Aqua Chem Filter Cleaner
• Adding Super Water Clarifier or Natural Clarifier to gather smaller particles into larger masses that can be filtered out of the water

The solution to high pH imbalance is to add Aqua Chem pH Down according to label directions to achieve a pH level of 7.2 – 7.6

What is Algae? October 06 2014

What is Algae? The Three Types of Swimming Pool Algae Green Algae - Green algae are free-floating, can turn a pool green in a matter of hours, and can be found in all types of pools. It's the most common type of algae - it’s also the easiest to prevent or eliminate. Black Algae - Black algae is a blue-green filamentous algae that grows as black, slippery spots on rough surfaces of concrete and plaster pools. It forms a protective coating around itself and if not checked, can grow into a dense black mat. Mustard Algae - Mustard algae appears as orange, yellow or mustard spots on pool walls and floors. It’s a difficult algae to eliminate and can be found in all pool types.   The Causes of Swimming Pool Algae Algae growth is usually caused by one of the following conditions: Inadequate free available chlorine levels - Free available chlorine levels can be depleted quickly by heavy rains, high bather loads or poor maintenance procedures. During such conditions, check free available chlorine levels frequently and add an Aqua Chem chlorine sanitizer as needed, according to label instructions. High pH - Alkaline (high pH) water prevents chlorine from effectively killing algae. Aqua Chem pH Decreaser, used as directed on the label, will lower pH to the correct level of 7.2-7.6. Dirty Pool Surfaces - Dirt and slime accumulation on pool surfaces provides the perfect location for algae problems to start. Weekly brushing and vacuuming eliminate this source of trouble.   Green Algae Treatment & Prevention

1. Check filtration and circulation systems for malfunctions.
2. Check the pH and adjust (if necessary) to 7.2 - 7.6.
3. Following label directions, add Aqua Chem Algaecide ELIMINATOR MAX or ELIMINATOR algaecide. Allow algaecide to work overnight. Then brush and vacuum pool surfaces. Backwash the filter to remove accumulations of dead algae and debris.
4. For major infestations, a second treatment may be needed.
5. Return to normal maintenance with Aqua Chem chlorinating products, shocks and balancers.
6. As an algae preventative, add Aqua Chem Algaecide ELIMINATOR MAX or ELIMINATOR per label directions as listed for preventative maintenance.

  Black or Mustard Algae Treatment

1. Check the pH and adjust (if necessary) to 7.2 - 7.6.
2. Vigorously brush away any visible algae.
3. Vacuum pool surfaces and backwash to remove as much debris as possible.
4. Following the label directions, add Aqua Chem Shock PLUS®.
5. Following label directions, add Aqua Chem Algaecide ELIMINATOR MAX Algaecide (for all pool types). Allow algaecide to work overnight. Then brush and vacuum pool surfaces. Backwash the filter to remove accumulations of dead algae and debris.
6. For major infestations, a second treatment may be needed.
7. Return to normal maintenance with Aqua Chem chlorinating products, shocks and balancers.
8. To prevent black algae, add Aqua Chem Algae ELIMINATOR MAX or ELIMINATOR Algaecide per label directions as listed for preventative maintenance.

First Post September 25 2014

This is your store’s blog. You can use it to talk about new product launches, experiences, tips or other news you want your customers to read about.

You can check out Shopify’s ecommerce blog for inspiration and advice for your own store and for your store’s blog.

How do I remove this post?
Log in to your store’s admin area then go to the blog section to delete this post.